Plastic Handle Vertical Rotary Incremental Encoder Switch for Household Appliances Precise Control & Durable Design

Ⅰ. Core Parameters

• Model: ED1212S (Plastic Shaft/Withdrawable Tube/With Switch)
• Dimensions: Shaft length L optional 12.5-30mm, suitable for different installation requirements.
• Electrical Performance:
  • Rated Voltage: DC 5V, 10mA
  • Output Signal: AB phase difference pulses, resolution optional 12/18/24 pulses/360°
  • Contact resistance ≤3Ω, insulation resistance ≥100MΩ, withstand voltage AC 300V.
• Mechanical Performance:
  • Full rotation 360°, detent torque optional 60-150gf·cm
  • Shaft push-pull strength 50N, wobble ≤0.4mm, switch operating force 6±3N (for switch-equipped models).
• Environmental Tolerance:
  • Operating Temperature: -20℃~70℃, Storage Temperature: -35℃~85℃
  • Passes humidity/heat/cold tests, withstands 60cm drop.

Ⅱ. Switch Function (Optional)

• Rated Capacity: DC 5V/10mA
• Switch Type: Single Pole Single Throw (Push-ON), travel 0.5±0.3mm, service life 10,000 reciprocations.

Ⅲ. Welding and Usage Notes

• Welding Conditions: Manual welding ≤300℃/3s, dip welding ≤260℃/3s, avoid flux entering the encoder.
• Precautions:
  • Store in moisture-proof and corrosion-proof environments, best used within 6 months.
  • Avoid lateral pressure/impact on the shaft, use Phase A as the reference in software design.
  • Keep away from water, avoid wiring near the welding area on the PCB component side.