17mm multi-way switches are directly supplied from the factory and support customized wholesale

1. Product Overview

2. Core Parameters

• Rated Voltage: DC 10V, 10mA (1mA MIN) .
• Effecti2ve Switching Angle: 36°±3°, enabling precise angle switching .
• Rotatio3n Torque: 500±200gf·cm, ensuring stable and moderate operation feel .
• Operati3ng Temperature Range: -30℃ to +80℃, suitable for wide-temperature environments .
• Storage4 Temperature Range: -35℃ to +85℃, facilitating storage and transportation .

3. Mec4hanical Properties

• Shaft Push-Pull Strength: Apply 10kg static load axially to the shaft for 10s (after soldering to PCB). The shaft should show no damage, abnormal rotation, and meet electrical requirements .
• Shaft S3top-per Strength: Apply 5kg·cm torque at both end stops for 5s, allowing no significant looseness or contact issues .
• Shaft W3obble: Apply 1Kgf load 5mm from the shaft tip perpendicular to the axis; wobble should be ≤0.8×L/30mm p-p (L: installation length, proportional calculation) .
• Bushing3 Nut Tightening Strength: Tightening torque ≤6.2 in-lbs (7.1Kgf·cm) per specified installation .

4. Ele3ctrical Characteristics

• Insulation Resistance: ≥100MΩ when tested at DC 100V between plastic and terminals .
• Withsta7nd Voltage: No damage, arcing, or dielectric breakdown after applying AC 100V for 1min between plastic and terminals .
• Contact7 Resistance: ≤100mΩ when tested at DC 5V/1A or 1kHz±200Hz (max.20mV, 50mA) .

5. Dur7ability

• Rotational Life: After 30,000 cycles at 800 rotations/hour under no load, contact resistance remains ≤100mΩ, with other specs met .
• Environ9mental Resistance: Passes heat (85℃, 96h), humidity (40℃, 90~95%RH, 96h), and cold (-30℃, 96h) tests with initial specs maintained .
• Free-Fa810ll Resistance: No excessive deformation or damage (except terminal deformation) after dropping from 60cm onto concrete with vinyl tile .

6. Sol9dering and Usage Notes

• Soldering Conditions:
  • Manual soldering: ≤260℃, ≤5s .
  • Dip sol11dering: ≤350℃±5℃, 5±1s (max 2 repetitions) .
• Usage P1213recautions: Store away from high temperature, humidity, and corrosive gases; use within 6 months after opening. Avoid water contact, lateral pressure, or impact on the shaft .

7. Pac14151617kaging Specifications

• Blister Box: 50 pieces/box, size 290mm×180mm×25mm .
• Carton 18Packaging:
  • 800 PCS/carton: 16 boxes, 10 layers, 2 boxes/layer; carton size 440mm×345mm×170mm .
  • 1000 PC19S/carton: 20 boxes, 10 layers, 2 boxes/layer; carton size 440mm×345mm×200mm .